documentation:digitization
Differences
This shows you the differences between two versions of the page.
|
documentation:digitization [2015/06/24 10:06] rstoiber_nhm [Herbarium W] |
documentation:digitization [2018/09/04 05:22] (current) armin_loeckher [Herbarium W] |
||
|---|---|---|---|
| Line 329: | Line 329: | ||
| * take a picture of the focus wedge | * take a picture of the focus wedge | ||
| * reduce illumination | * reduce illumination | ||
| - | * 3,5 marker on the focus wedge must be sharp | + | * 2,5 marker on the focus wedge must be sharp |
| * set illumination back to 0 and aperture back to 22 | * set illumination back to 0 and aperture back to 22 | ||
| * create LCC raw file - once per day! | * create LCC raw file - once per day! | ||
| Line 385: | Line 385: | ||
| * set aperture to 4 | * set aperture to 4 | ||
| * turn on live feed (camera symbol) | * turn on live feed (camera symbol) | ||
| - | * turn the focussing ring of the camera lens till the 3,5 marking on the focus wedge is sharp and clear. Be aware of the short delay between live feed and actual movement. | + | * turn the focussing ring of the camera lens till the 2,5 marking on the focus wedge is sharp and clear. Be aware of the short delay between live feed and actual movement. |
| * set aperture back to 22 | * set aperture back to 22 | ||
| * take a picture, name it "Schärfe_(date)" and check the result | * take a picture, name it "Schärfe_(date)" and check the result | ||
| * close the CaptureOne Software. (Note: This is mandatory! using the live feed may cause problems otherwise.) | * close the CaptureOne Software. (Note: This is mandatory! using the live feed may cause problems otherwise.) | ||
| * wait for 10 seconds | * wait for 10 seconds | ||
| + | * restart the CaptureOne Software | ||
| + | * If you can not take photos after restarting the program, shut down the computer and the power supply and restart the whole system. | ||
| Line 402: | Line 404: | ||
| * select the picture, click the right mouse button and select "LCC erstellen" | * select the picture, click the right mouse button and select "LCC erstellen" | ||
| * select the pipette tool and use it on the picture to configure the white fader | * select the pipette tool and use it on the picture to configure the white fader | ||
| - | * set both flash devices back to 8,7 | + | * set both flash devices back to 9,1 |
| * restart the CaptureOne Software | * restart the CaptureOne Software | ||
| - | * If you can not take photos after restarting the program, shut down the computer and the power supply and restart the whole system. | ||
| * take a photo to reconfigure the flash devices | * take a photo to reconfigure the flash devices | ||
| + | * If you can not take photos after restarting the program, shut down the computer and the power supply and restart the whole system. | ||
| 6) Taking pictures | 6) Taking pictures | ||
| Line 469: | Line 471: | ||
| * "Blende" (aperture): 22 | * "Blende" (aperture): 22 | ||
| * "Belichtung" (illumination): 1/125 | * "Belichtung" (illumination): 1/125 | ||
| - | * "Blitz" (flash): 8,7 | + | * "Blitz" (flash): 9,1 |
| * Proof Profil "AdobeRGB (1998)" | * Proof Profil "AdobeRGB (1998)" | ||
documentation/digitization.1435140364.txt.gz · Last modified: 2015/06/24 10:06 by rstoiber_nhm
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
