JACQ Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Specimens ======


===== The "Edit Specimen" form =====


ln the following the "edit Specimens" window - the entry form for the specimens - will be explained in detail from the upper left to lower right corner. Mandatory fields are shown against a blue background, they have to be filled in; in all other fields you can (and should!) enter corresponding data when you have reliable information available, but only then.



{{  https://docs.google.com/drawings/d/1k_3PClzYilVwcb81XDvWMmYEFWzzfzRFdhQYz2V6GPM/pub?w=974&h=811&.png?nolink&687x606  }}


Your herbarium might have special rules on databasing; please refer to the [[documentation:input:specimens#herbarium_specific_information|Herbarium specific information]] for more details!

====*====

Clicking on * opens the list of editors of this specimen, plus date and time of changes.


----


==== SPECIMEN_ID ====


A new specimen entry is indicated by NEW and will get its own specimen_ID when pressing INSERT (bottom line) → a new data record will be created; NEW will change to 123456, editing is not possible any longer; click EDIT to start editing again. The specimen ID will change from yellow numbers to black numbers in a light green field, indicating the input mode. Changes will be saved by clicking on UPDATE (bottom line).

Clicking on the yellow specimen ID opens a form for printing labels which is also possible from the main menu and from the “list Specimens” form.


----

====< >====


Only visible for already entered specimens (they will though not show up directly after INSERT or UPDATE); specimen entries of a search may be flipped through.


----

====API====


This may or may not be present in your database version. Tick this box if the specimen is relevant for the “African plants initiative”.


----


====DIG.IMAGE ====


(= Digital image/photo of the specimen) Ticked only if the specimens are/ will be scanned (type specimens or material on loan). Clicking on DIG.IMAGE opens the image in a new browser window (if already scanned).


----


====DIG.IM.OBS.====


(= Digital image observation) If a record is based on a field observation with a picture only; TAXON, LOCALITY etc. are filled in as it would be a herbarium specimen, the picture is hereby linked to the record.


----

====CHECKED====


Should only be ticked after the final check of both specimen information and scan.


----


====ACCESSIBLE====


Accessibility of the specimen information on the public web interface: [[http://herbarium.univie.ac.at/database/search.php|The Virtual herbarium]]


----


====INSTITUTION ====


Select the institution the specimen belongs to (e.g. “W” for “Naturhistorisches Museum Wien”) from the drop down menu.


----


====HERBAR NR. ====


Stamped, continuous, unambiguous number of the specimen (usually found near the upper top corner of the specimen).


> Note: This number HAS TO BE ON THE SPECIMEN before scanning, if missing it has to be stamped on forehand. The herbarium number is very important to be able to connect the scans that will be taken with the correct specimen entries! Double check it! Other than arabic numbers have to be written into ANNOTATIONS.


----


====COLLECTION ====


Select the collection to which the specimen belongs to. If several collections are indicated, take the oldest one and write the others in the annotation field.


----

====NR.====

Used for old herbarium numbers of special collections that were previously on the specimen before the current herbarium stamp was added; e.g. at W: orchid collection of Reichenbach (COLLECTION: W-Rchb.Orch.) – type only arabic digits into this field, type letters into the ANNOTATION field).


----


====LINKS ====


A new input window will open in which you can link (two or more) specimens that belong together . Linking is required if…


    * specimens have been separated from one onto two or more new specimens
    * several sheets belonging together are present (sheet 1/ 3, 2/ 3 and 3/ 3)
    * drawings (=delineatio typi) belong to the specimen


----

====T TYPE ====


Only relevant for type specimens – left empty for all other specimens; select from the drop down list. The status has to be the same as on the herbarium specimen (the chronologically last typification).


The T can be clicked on, a new window will open; see [[documentation:input:taxonomy#Typification|chapter "Typification" in the taxonomy manual]]
----


====STATUS ====


Notes of aff. (affinis=close to), agg. (aggregate=complex), cf. (confer=it probably is), s. str. (sensu stricto= in a narrow sense) or s. l. (sensu lato=in a broad sense) after the taxon name on the label; do not enter nov. spec. or x (for hybrid), they will only be used in special cases.


----


====GARDEN ====


Originally cultivated material from a garden, e.g. “HBV”


----


====VOUCHER ====


Information on voucher status (caryological investigations etc.); choose from the drop-down list; new voucher types may be entered when clicking on VOUCHER.


----


====TAXON ====


Current name for the plant (including the author), after typing in at least the first few letters of a taxon [best species plus subspecies, e.g.: “car hir”] choose from the drop-down list.

Taxa that are shown against a red background are non-accepted taxa and may only be chosen if the herbarium institution enters the name of the taxon that this specimen is type for (e.g. in WU and W Krypto) but never if the current name should be entered (e.g. in W).

**Special case: Hybrids**
Genus or species hybrids are recognised by the multiplication sign X.
Entering: Search for one of the parents, choose the hybrid from the drop-down list. Control: Click on TAXON to open the taxon window (edit Species), click PARENTS to open the hybrid window (edit Hybrids) – see the taxonomy manual for further information!


----


====DET / REV / CONF ====


Det(erminavit): the person who determined the plant; rev(isio): new or re-determination; conf(irmavit): the person who confirmed the determination, i.e., agreeing with the previous determination. Always enter the name of the most recent det., rev. or conf. as exactly as possible, e.g.: A. B. Surname (XX) YYYY-MM-DD with (XX) being a placeholder for the standard acronym for the herbarium where the person was active, e.g. WU; see [[http://sweetgum.nybg.org/ih/|“Index Herbariorum”]].

Example: H. Rainer (W) 2013-03-12

If the last note of a person is no determination, but an annotation, this person should be entered instead of the last “true” determiner; if the person is unknown enter “Anon.”. If the name is illegiable, enter "Unclear".

**Special case - Type material:** If the original name including the author is given, and if there is no explicit determinator for this name, you can in case of type specimens assume that the author of the name is also the determinator.


----


==== IDENT.HISTORY ====


Enter the determinations chronologically starting with the oldest (original) according to determination labels or handwritings on the sheet. Do not enter author names of the taxa! Ignore labels without new determination (i.e. typification labels).


At the end of the identification history has to be the same determinator as entered in DET/REV/CONF., followed by the same name as in the Taxon field. [The only exceptions are type specimen in herbarium institutions where the basionym is entered in the field TAXON, e.g. WU or W-Krypt.] Do not use any punctuation (like .,;) at the very end of IDENT.HISTORY.


|;         | separates determinations of different persons |
|!         | confirmation of previous determination        |
|Anonymus  | determinator unknown                           |
|next      | determination of the same determinator as before, but no date is given; if a date is given, write  “next YYYY-MM-DD:”.                                    |
|orig.     | first determination, if done by the collector. If not, use the first determinator's name instead of "orig.".  |
|Unclear   | name is not readable or unclear                |
|:=        | name assignments or classifications without a “true” determination, based on synonymy lists |


----


====TYPIFIED BY ====


Only relevant for type specimens – left empty for all other specimens.


Typifier is the person that typified the specimen first with the most accurate status (confirmations only are not taken into account, if “type” is written without an author, enter “Anonymus” as an author); if only the taxon name and spec. nov. is given, enter as typifier the author of the name; e.g.: A. Surname (XX) YYYY-MM-DD. If the typifier is unknown enter “Anonymus”.


----


====SERIES ====


Only relevant for Exsiccata series – choose from the drop-down list. True Exsiccata series are often widely distributed collections of specimens, often with printed labels (some old printed labels can look as if they were hand written), typically with a serial number, often “Flora exsiccate” or similar as head line.


Do not enter new series!


----


==== SER.NR ====


Serial number of the Exsiccata series, typically given with the serial (exsiccata). Enter only Arabic numerals; sometimes a collector's number is given as well (see below).


----


==== FIRST COLLECTOR ====


If there is more than one collector on the label, only enter the first; enter the family name (or parts of it), and choose the correct collector from the drop-down list.


|“Anonymous collector” |collector unknown |
|“unclear” |name is not readable (write readable parts into ANNOTATIONS). |


Adding new names as first collector
Only when you are completely sure that the collector does not exist in the list! Click on FIRST COLLECTOR, the “edit Collector” window opens:

{{  https://docs.google.com/drawings/d/1De3TVUsDp0egfr4DJ7U38WxFFtk5OIo1w56gapP3VEc/pub?w=697&h=214&.png?nolink&697x214  }}

Enter the name of the collector (Family name, comma, Initial(s) with dot(s) – but no spaces!); if the first name is not known with certainty only enter the surname. In the other field enter the record number of HUH: [[http://kiki.huh.harvard.edu/databases/botanist_index.html|The Harvard University Herbaria]]. Click on INSERT to save the collector (and insert the name in the drop-down list).

Please be CAREFUL when you enter a new name as it cannot be corrected!

----
====NUMBER ====


The collector's own collecting number (enter only Arabic numerals, else: see ALT.NR.); if absent, enter “s.n.” (sine numero) in the field ALT.NR.


----


==== ALT.NR . ====


(= alternative Number) Enter collector's number including punctuation (full stop, colon, dash etc.); or those parts of the collector's numbers that are not Arabic numerals; e.g.: 3857a: 3857→NUMBER, a→ALT.NR.; in case of more than one collector's number, enter the second collector's number here; otherwise leave empty. Enter “s.n.” (sine numero) if no collector's number is given.


----


====DATE ====


The collection date. Format: YYYY-MM-DD or YYYY-MM or YYYY; missing years or illegiable dates can be replaced with “#”, e.g. 18##-06-06 or 18## or 189#. Enter “s.d.” (sine dato) if no date is given.




----


====ADD. COLLECTOR(S) ====


Additional collectors to the first collector; enter in the same order as on the label, choose from the drop-down list.

Only when you are completely sure that the collector does not exist in the list! Click on ADD. COLLECTOR(S), the “edit Collector 2” window opens:

{{  https://docs.google.com/drawings/d/1kAu8UAjYUGQmL2ZrpmjZlIXKDeuWZUNvyAUlgSWr1WA/pub?w=717&h=180&.png?nolink&717x180  }}

Enter the name of the collector(s) (Family name, Initial(s) separated by dot(s), no spaces in the name!), they are linked with “,” and “&”, for example: Müller,K.H., Meier,S.H. & Kugler,K.L. Click at INSERT to save the entered name (and insert it to the database).

Please be CAREFUL when you enter a new name as it cannot be corrected!

----


====COUNTRY & PROVINCE====


Enter the country only when known with certainty; choose from drop-down list; for old specimens: enter the current political territory; check the historical geographical situation compared with the present: see [[http://www.geonames.org|Geonames]]

In the PROVINCE field you can choose from a drop-down list (only possible after entering the COUNTRY). Please enter the province only when known with certainty

----


====GEONAMES====


Enter a name of the locality as exact as possible. When clicking on "geonames" a new window opens which allows to find and choose the correct locality. For automatically entering the coordinates of the chosen locality into the "LAT./LON."- field, click "use this".

If you do not find the desired location in the drop down menu, exit the geonames service and delete your entry in the geonames field.

----


====ALTITUDE====


Height above sea level (elevation) in meters (only digits, no full stops, comma, letters etc.); if the altitude is given as an interval, use both fields.If the original altitude is given in feet (', Fuß, ped), convert it to meters (1m = 3.28')


----


====QUADRANT====


The quadrant number, used e.g. in floristic inventories, consists of a four- digit number (the grid number), followed by single-digit (the quadrant number, which divides each grid cell into four fields). After entering both numbers you can click on °→ and the coordinates for the quadrant will automatically be entered in the fields LAT./LON.; use this only when not more precise coordinates are available.


----


====LAT./LON. & EXACTN.(M)====

Latitude and longitude (GPS-data), enter as degrees (°), minutes ('), seconds (''); only seconds may be rounded; convert decimal fractions if needed. For more inforamtion on this please refer to [[http://www.fcc.gov/mb/audio/bickel/DDDMMSS-decimal.html|this page]]

In the EXACTN.(M) field you can specify exactness of measurement of latitude and longitude, if given, e.g. “500m”.


----


====LOCALITY ====


Collecting locality as written on the collector's original label, including country, province, altitude etc. (if given). The locality should be written as on the label: old spelling and including special letters, e.g., ä, ö, é – if needed, add current names/spellings within square brackets [ ]. If parts of the text are illegible, indicate these passages with […]; for unclear transcriptions [?], e.g., Fluss[…]e or Flufgufer [?]; Comments are entered in square brackets [ ].


Enter “sine loco” if no locality is given.

**Special case - Type material:** 
May be complemented by using  literature; enter  “[protologue]” or  reference (abbreviated), including year  and page(s), e.g.: "Drège (1843) - Flora 26: 149".
You may also use information from other specimens with exactly the same collection number but more exact information on the original label, in this case leave a note in the annotations.


----


====HABITAT PHOROPHYTE ====


= biotope, "ecology", substrate, surrounding vegetation; for epiphytes (plants growing on other plants, e.g. lichens) the phorophyte (the plant it is growing on) is given. E.g., riparian forest, Quercus-Caprinus-forest, dry slopes, swampy meadows, limestone, clay marl, collected together with XY, etc. If part of locality: if it is not possible to separate habitat information from locality information, copy the habitat information.


----

====HABITUS ====


The appearance of the plant, the growth form, shape/colour of flowers etc.; e.g. long awns, runners, flowers yellow. Extensive (and often hand written) descriptions of the plants are not necessary to transcribe.


----


====ANNOTATIONS ====


In chronological order; separate notes/ different labels in an extra paragraph. Additional information of collector and other notes on the specimen/ from the label(s), that cannot be entered in other fields (if possible indicate date and person); your own annotations [in square brackets]; complementary information on e.g., illegible collector names (additional information if “unclear” was entered at F IRST COLLECTOR, you may use “#”, but never “?”, as it cannot be searched for); transfers and acquisitions from other herbaria/ collections; specimen stamps or labels that cannot be chosen from the drop-down list at COLLECTION; locality of duplicates at other herbaria (use the standard herbarium acronyms found at [[http://sweetgum.nybg.org/ih/|Index Herbariorum]]: e.g. "ex E".


----


====< SPECIMENS ====


Go back to main menu for specimen search, deletes entries if not saved.


----


====RESET ====


RESET will go back to the original state of the entry, and new entries you have just entered will not be saved.


----



====INSERT ====


Insert and save the newly created specimen entry; NEW will change to a new specimen_ID; INSERT and INSERT&NEW will disappear, EDIT and NEW & COPY will appear.


----


====INSERT&COPY / INSERT&NEW ====


INSERT&COPY will insert and save the newly created specimen entry; and additionally copy this entry to use it as a new specimen entry. INSERT&NEW will additionally create a new, empty specimen sheet


----


====EDIT / UPDATE====


Start editing again, the input mode is indicated by 123456, changes will be saved by clicking on UPDATE.


----


====NEW & COPY ====


Create a copy of this entry to use it as a new specimen entry.


----



===== Workflow =====


If you want to enter a new specimen you have two possibilities:

    * open an empty entry form by clicking on NEW ENTRY.
    * search for a specimen that is already entered in the database which is similar to the one you want to enter, copy and modify this specimen.

When searching for a specimen you can either choose an entry from the dropdown menu of INSTITUTION, CONTINENT or REGION or search for e.g. TAXON or COLLECTOR while entering your search criteria; here also only parts of the word may be typed in [and no % or * is required as a place holder].

> Note: before you enter a new specimen into the database make sure that it is not already entered (search for the taxon [also only for the first few letters as it may have been mistyped]), herbarium number, collector etc.).



==== Entering a new specimen ====


lf you decide to open an empty entry form, click on NEW ENTRY in the "list Specimens" form. This window opens:


{{  https://docs.google.com/drawings/d/1k_3PClzYilVwcb81XDvWMmYEFWzzfzRFdhQYz2V6GPM/pub?w=974&h=811&.png?nolink&569x585  }}


As an example we use this specimen:


{{  https://docs.google.com/drawings/d/1o96y-L9zGrf7tDUYhwtDvdS4yTjoAbN9BEu3d95XZiI/pub?w=549&h=430&.png?nolink&549x430  }}



The information on the label is filled into the form as follows…


{{  https://docs.google.com/drawings/d/1zXMpAbT9O_ZbhMoc3TTWnnhiWk3bCC9CY-gdP6ImCy8/pub?w=659&h=273&.png?nolink&659x273  }}


…which results in this:


{{  https://docs.google.com/drawings/d/1nHDAZeVMHT22LLwz18JzUI0m7bdXhus2HErv9Da4D0Y/pub?w=569&h=585&.png?nolink&569x585  }}


For a detailed explanation on every field please refer to [[:documentation:input:specimens#the_edit_specimen_form|the edit specimen form]].\\ 
For a comparison of herbarium sheet images and filled-in forms please see the [[:documentation:input:specimens#examples|examples]].\\ \\ \\ 

==== Creating a new database entry by copying and modifying an existing specimen ====


Again, this specimen is used as an example for the workflow:

{{ :documentation:input:specimens_-_example_sheet.png?548x429 }}


As it is often easier to copy and modify an existing specimen than entering it from the very beginning we search the database for similar specimens that are already entered into the database [start with only one or two criteria and enter subsequently more specific search criteria]. Typing in the search criteria “schneeweiss” into the field COLLECTOR, “carex” into TAXON, “georgia" into COUNTRY and pressing SEARCH, results in:

{{ https://docs.google.com/drawings/d/1w0ewiWcFDPRiBmqGYvHoNEZPwt6wihes0ayQ6P_CJLA/pub?w=706&h=353&.png?nolink&706x353 }}

As the second entry (Carex rupestris collected from Schneeweiss et al. 2002 in Georgia) looks most similar to the specimen that we want to enter we click on "Carex rupestris” [given in yellow] in the column “Taxon” and the specimen form of this entry will open.

{{ https://docs.google.com/drawings/d/1k2g0aKuh3G-gFjCb8ClTmMA7FLzaCg-R1UhalnjAFjc/pub?w=618&h=605&.png?nolink&618x605 }}

To copy and modify the entries of this specimen click on NEW & COPY in the lower right corner. The SPECIMEN_ID [in the upper left corner] will now change from 33226 to NEW, indicating that a new specimen entry is created (which will in the following get its own unique specimen ID) and it is now possible to modify it without changing the old one.

The information on the herbarium sheet should be entered as follows:

{{ https://docs.google.com/drawings/d/1zXMpAbT9O_ZbhMoc3TTWnnhiWk3bCC9CY-gdP6ImCy8/pub?w=659&h=273&.png?nolink&659x273 }}

After clicking INSERT [bottom line] a new specimen entry will be created:

{{ https://docs.google.com/drawings/d/1nHDAZeVMHT22LLwz18JzUI0m7bdXhus2HErv9Da4D0Y/pub?w=569&h=585&.png?nolink&569x585 }}

===== Herbarium specific Information =====


==== Herbarium W ====


This is work in progress…

    * **W: Herbarium number** 
= acquisition number (the number given to the specimens when it came to the herbarium). At W there are two possibilities:\\
__11-digit number__: e.g. Acqu 1960 Nr 1234 [=1234 specimen from the year 1960] should be written as 1960-0001234 [4 digits + 7 digits]\\
__7-digit number__: especially on recently stamped specimens. e.g. 0001234 \\
In W the Herbarium number has to be present on the sheet before entering the specimen into the database.

    * **W: Collections** 
W is the universal code for the collection of the museum. Other collections will be indicated by a stamp or handwriting. If several collections are indicated, take the oldest one and write the others in the annotation field.

    * **W: Links**
In some cases several collections are mounted on the same sheet. If those belong to seperate taxa, the collections are separated and mounted on separate sheets. If the collections belong to the same taxon, they remain on the same sheet, but create two entries into the database. Those entries are named 1234567A and 1234567B, respectively, and linked to one another. 

    * **W: Taxon** 
Always enter the current name of the specimen in the "Taxon" field. If the current name is on the folder but not on the sheet, a determination slip must be attached to the sheet, e.g. Anonymus: Potamogeton crispus L. 

    * **W-Krypt: Ident: Hist.**

    * **W: Alternative Number** 
The number of Ecklon (Ecklon & Zeyher) with a dot (e.g. 55.8) are no Collector's numbers. The number before the dot is a locality number, the number after the dot is the collection month (in this case August). Enter the number combination in the annotation field. You can look up the locality in the text of the document "Ecklon" in "API Material"

    * **W: Locality** 

**Special case - Cultivated plants:**
As LOCALITY (also NATION/ALTITUDE etc.) enter the locality of origin, as given on the label, COLLECTOR  and COLLECTING DATE  of the cultivated material. If collector, date, locality etc. for the original collection are known they should be entered in the ANNOTATIONS.


----


==== Herbarium WU ====


    * **WU: Herbarium number** 


__7-digit number__: there are only 6 digits; insert a "0" before this number to complete it to 7 digits.


    * **WU: Taxon** 


Always enter the basionym of the specimen in the "Taxon" field

    * **Wu: Locality**

**Special case - Cultivated plants**: enter original information of origin (LOCALITY, COLLECTOR, COLLECTING DATE etc.) as on the label; add in the ANNOTATIONS field where it was cultivated and at which date the herbarium specimen was sampled, e.g. “cultum in HBV 1983-11”.
===== Examples =====


{{ https://docs.google.com/drawings/d/1h_Rp8l23WccoDRGsQST-LrpbKIoH3f2aT3gj4T66MCI/pub?w=815&h=510&.png?nolink&815x510 }}



**Input form for example 1:** 


{{ https://docs.google.com/drawings/d/1JjkHX1aRBATbNtsSeRSqkYXwPGoK0iiEzUmJTUNdL4I/pub?w=550&h=571&.png?nolink&550x571 }}



----


{{ https://docs.google.com/drawings/d/1lG4in-7uqM0fIlYAcgZKJd3vZJticrcxXDL-LeyhX0M/pub?w=838&h=545&.png?nolink&838x545 }}



**Input form for example 2:** 



{{ https://docs.google.com/drawings/d/1rs26HmU5B4b-_nzD8ycyc5QGQjoulb6TLt8YAKotKdo/pub?w=535&h=545&.png?nolink&535x545 }}



----


{{ https://docs.google.com/drawings/d/140dWJrM1bKGlDOZ5TfgakqIHSx07_bXMi3GKx9JkvcI/pub?w=745&h=498&.png?nolink&745x498 }}



**Input form for example 3: ** 


{{ https://docs.google.com/drawings/d/1LbhvItGYnNMvE4eKkWDHNAY7vG0ASNZr46lhDoFR4D4/pub?w=514&h=534&.png?nolink&514x534 }}
JACQ Documentation

User Tools

Site Tools

Page Tools
